The most common materials that are used to build the exterior of a building are EIFS and stucco. The two surfaces serve the same process even though contractors use different materials to set them up. You can apply both of them to your commercial or residential property. Most people who own residential properties use stucco. It is a hard coat product that is used on the exterior of the house because it is durable and has the ability to provide extra protection to your house.
However, you can still use a similar material that is called EIFS (Exterior Insulation and Finish Systems). It is a soft synthetic siding material that does not provide a high level of protection like stucco. Some people even don’t know whether they have EIFS or stucco on their exterior walls. There are a few things that differentiate these two applications. You can choose any of them depending on your goals and budget.
The first thing that differentiates these two techniques is the installation process. EIFs and stucco installations are carried out in two different ways. While installing stucco, contractors start by putting a wire mesh in the right position so as to uphold the rock material. Once the wire mesh is in place, the contractor will apply the stucco over the place. the role of the wire mesh is to assist with the moisture that keeps on moving behind the rock. On the contrary, EIFS utilizes a baseboard that the contractors install in the right location. In most cases, the boards are constructed from Styrofoam. Once the board is in place, the contractor will apply a base coat. The last thing is to apply a finishing coat and the stucco will be ready. These two techniques are procedural and hence it is good to leave them in the hands of professionals.
The next differentiating factor of EIFS and stucco are their breathable properties. Both EIFS and stucco may appear to be similar at first glance. However, while one is an actual rock layer and the other one is synthetic, there is a way in which you can identify their differences. EIFS has a synthetic design that will not allow even a small amount of water to pass through them whether in vapor or liquid form. The reason is that this clagging material has a natural solid that is highly waterproof. On the other hand, stucco is a naturally porous siding material. Therefore, it allows a certain amount of moisture to move in to or out of the wall. What we are saying here is that it allows the stone to breathe. This process is helpful in some climates because the fluctuation may prevent cracking.
The other tip entails performing the knock test. If you are not the one who installed the siding material, you may be wondering whether it is EIFS or Stucco. It is quite hard to distinguish between these two materials by simply looking at them. The best way to differentiate between these two materials is by performing the ‘knock’ test. All you need to do is going to the outdoors and knocking the material. EIFS will most likely produce a hollow sound. The reason is that this sound will have to travel through the Styrofoam base, and the heat from the wall behind it can reverberate back. On the other hand, when dealing with stucco, you will feel as if you are knocking a stone. A large proportion of the stucco installation process is more or less a rock. Therefore, you will tell the difference with the knocking test easily.
You can also test the difference between EIFS and stucco by testing the gap. In most cases, you will find a gap between the ground and the bottom on the EIFS/stucco and the base of the foundation of your construction. You can decide to feel the region that is under the EIFS or stucco. In case you can feel cladding coming out of your foundation approximately one inch or more than that, there is a high possibility that you have stucco. While installing EIFS, the baseboard utilizes an extension system that is not completely covered in most cases. When it comes to stucco, this feature is missing.
Lastly, to be sure, make sure you check the installation points. If you are still not sure whether you have stucco or EIFS, you can get these details by checking the installation points. Remove an intercom, gutter trap, outside light fixture, or any other object that the contractors installed in the wall or around the EIFS or stucco. You will know that you have EIFS if you can see the Styrofoam board.
These testing methods will help you to determine whether you have stucco or EIFS installed on your building. The information can also help you to make a decision when you want to buy a new building. It is good to know whether stucco or EIFS will work well for you depending on your region.
Stucco and EIFS remain to be the best cladding options in the market. Some of the top advantages of these two systems include energy efficiency, low maintenance costs, high levels of durability, high aesthetic appeal, and fire and weather resistance. Tallahassee Stucco and EIFS Repair Services is the best brand for installing stucco and EIFS in your building. You can use it on both commercial and residential premises.
Here is a list of our services you can get at Florida EIFS Stucco Texturing Repair Services:
Request for a free quote from our EIFS Stucco Texturing Repair Services company now! We also service all counties throughout the State of Florida! Below is a list of cities where we offer our EIFS Stucco Texturing Repair Services:
All counties in the state of Florida area. Just call and ask!